1st floor , Himalaya Emerald 132 Ft.Ahmedabad
naturecoat@gmail.com 
Naturecoat is suitable for single component usages.
- With its unique BIO CROSS LINKING technology, Naturecoat oil gives a natural open grain touch-feel to the wood which is very easy to clean & maintain.
- Naturecoat is ZERO VOC (Volatile Organic Compounds) Eco-friendly and Sustainable Product.
- Bio Cross Linking gives it WATER REPELLENT properties.
Why to Apply:
.svg)
Matt open grain polishing Protection and staining (if required) in one single product.
How to Apply?
- Product is for application on untreated, new or newly sanded woods/veneer of all species of woods, ply and MDF.
- It is advised to thoroughly vacuum the sanded surface with cleaners to eliminate the dust, post appropriate sanding.
- Apply the oil on freshly sanded wooden surface with up to 220 to 600grit dry sanding paper as per recommended colorless/clean cloth or polishing pad while spreading the oil evenly on the surface.
- Leave the oils to crosslink for a few minutes. Then thoroughly remove the excess of oil with dry white cloth/pad. The surface should be rubbed until it feels dry (there should not be any residual oil on surface).
- For an extra attractive surface, wood can be repolished after 8-12 hours of the first application. The surface should be thoroughly polished as per above steps.
